Secondhand 30W Fiber Laser Machine for 70x70 110x110 175x175 Metal Marking

  

Secondhand 30W Fiber Laser Machine for 70x70 110x110 175x175 Metal Marking. Bring your ideas to life with OMTech's versatile fiber laser engravers! This 30W sealed fiber laser engraver is your ultimate resource for engraving words, logos, pictures, barcodes, and more on metal including personalized gold and silver jewelry! And other materials with a quick turnaround and perfect accuracy. Our device's state-of-the-art M.

Fiber laser avoids the tetchiness, fragility, and water-based mess of CO2 laser tubes. Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours.

The Galvo-Tech galvanometric system and 3 F? Of 70x70 mm (2.8x2.8 inch), 110x110 mm (4.3x4.3 inch), & 175x175 mm (6.9x6.9 inch) working areas. Ensure quick work with less than 1% distortion from your design. The built-in workspace grid and laser locators make calibrating everything fast and easy.

Adjust the scanner head up or down from the control panel and the provided sensor will let you automatically adjust the laser beam to compensate. Safely observe your engraver in action thanks to the transparent tinted acrylic window and helpful built-in light. The integrated interlock will automatically cut off the laser beam if the protective cover is opened. Rotary axes are not included but plug-and-play connection is provided for units with 4-pin connections to mark curved surfaces such as gold and silver rings and bracelets. Laser engraver is operated from the bundled edition of EzCad2, compatible with 32 and 64-bit editions of Windows XP, 7, 8, and 10.

For all your projects cutting and marking metals, gems, silicon, and more, you can do no better. Enjoy stable dependable operation with an MTTF over 100,000 hours thanks to this engraver's solid-state laser source. Its 1064 nm wavelength provides exceptional metal marking, with a 20? M spot able to engrave 0.08 mm (0.003?) deep on a single pass with smooth and delicate edging, minimal additional processing, and no waste of materials.

The laser arm's drive and scanning system provides outstanding accuracy and works with the F? Lenses to produce both fast and stable marking of flat surfaces at speeds as fast as 275.6 inches per second (7000 mm/s). Lenses create vivid markings on flat surfaces by maintaining a consistent, focused laser spot size across their 70 × 70 mm (2.8?), 110 × 110 mm (4.3?

), and 175 × 175 mm (6.9? Producing less than 1% distortion, they flawlessly execute intricate designs with unbelievable precision. The preinstalled autofocusing sensor lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome tools and tedious manual adjustment. The built-in exhaust fan directs smoke, debris, and sparks away from the engraving surface and into the ventilation pipe. You can also easily connect the duct to any OMTech fume extractors to pull in exhaust and purify air during your work.

The dependable Beijing JCZ Tech control board organizes all of the aspects of this long-lasting multifunctional fiber laser marker and keeps them humming along. The integrated workbed is compact with a simple interface. The built-in grid allows convenient and safe adjustment of the laser's position.

Its M5 holes can be fitted with positioning bars to keep your material just where you need it. Your fiber laser comes with a bundled edition of EzCad2 engraving software compatible with Windows XP, Vista, 7, 8, and 10 and a wide range of graphics formats. Create marking magic at the push of a button! The transparent acrylic window's green filter and helpful light allow you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes.

A pair of OD4 laser glasses come included to protect your eyes from the 1064 nm beam of this laser, as well as offering protection from other alexandrite, diode, and neodymium (Nd:YAG) lasers. Separately grounded for your safety, the scanner and laser source have separate power controls.

The access key precludes any unauthorized use of your laser, and the large E-stop is ready in case of emergencies. Certified compliant with ISO standards 11553 & 12100 and IEC standards 60204 & 60825, this fiber laser machine lets you produce professional quality engravings with dependable safety.

Marking Area: 2.8×2.8 in. (70×70 mm) 4.3×4.3 in. (110×110 mm) 6.9×6.9 in. Compatible Image Software: AutoCAD, CorelDraw, Illustrator, Photoshop, etc. Expected Service Life: 100,000 hr.

Marking Speed: 275.6 ips (7000 mm/s). Compatible Materials: Metals, Ceramics, Stone, Some Plastics. 1 x Sealed Laser Engraver. 1 x 70×70 mm F-Theta Lenses.

1 x 110×110 mm F-Theta Lenses. 1 x 175×175 mm F-Theta Lenses. 1 x USB Flash Drive. 1 x Hex Key Set.

Acrylic, Hard Plastics, Brick, Granite, Marble, Tile, Aluminum, Gold, Silver, Stainless Steel, Brass, Titanium, Tungsten. Master, AmericanExpress, Discover, Google Pay. If you must modify your. This item comes with a. Special circumstances will be stated clearly in the listing.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years.

It is our mission to provide innovative products and competitive prices to satisfy you.