RC7110 High Speed GALVO Scanner Head for Fiber Laser Engraving Marking Machines

  

RC7110 High Speed GALVO Scanner Head for Fiber Laser Engraving Marking Machines. GALVO SCANNING HEAD FOR FIBER LASERS. Perfect as either a replacement or upgrade, this galvo scanner head slots onto any standard OMTech fiber laser and is compatible with other galvo lasers emitting 355 nm, 1064 nm, or 10.6 µm wavelength beams from 10 mm aperture collimators.

Galvanometric scanning head positions itself at 315 ips, sets in under 0.3 milliseconds, and then marks and engraves at speeds up to 196 ips (5000 mm/s) with high resolution, minimal drift, and outstanding linearity. The galvo head's built-in red dot indicator produces a clearly visible locator, allowing you to quickly and easily position your material and focus your design before each run. Electrical fail-safes include protection against overload, overcurrent, and reversed polarity, ensuring lastingly stable performance. Plus, our customer service and tech support team is always ready to help. Have you worn the motors right off your fiber laser's old galvanometer?

Is it past time you upgraded your machine's standard galvo head to enjoy a tighter spot size, faster processing, and even greater accuracy? This RC7110 3D laser scanning system is the perfect Sino-Galvo replacement or upgrade for any OMTech laser marking machine, with a 10 mm wide laser aperture and M85 thread lens housing.

This compact galvanometer kit comes with the serial cable and new 15V power supply so it's ready for installation on any compatible 355, 1064, or 10600 nm laser engraver. High-performance rotary motors convert the instructions from your control computer into precise movements of the X and Y mirrors to mark your text, designs, logos, serial numbers, bar codes, and more across flat surfaces of metal, stone, and hard plastic. The helpful built-in red dot locator keeps setup and positioning fast and convenient, letting you measure twice and cut once faster than ever. Precise positioning, high resolution, and minimal drift for outstanding linearity, this galvo scanner head kit is the quality solution for your fiber laser engraving machine.

Marking Speed: 196 ips (5000 mm/s). Positioning Speed: 315 ips (8000 mm/s). Setting Time: 0.3 msec.

Continuous Use: 0.5 mrad. Scale Drift: 22 ppm/°F (40 ppm/°C). Zero Drift: 8 µrad/°F (15 µrad/°C).

K9 Glass: 9.1 J/cm². Position Signal Impedance: 10kO (±1%). Position Signal Input Scaling Factor: 0.33 V/deg.

Laser Wavelengths: 355 nm / 1064 nm / 10.6 µm. Laser Input Aperture: 0.4 in. Central Distance between Mirrors: 0.5 in.

Driver Board Dimensions: 3x1.8x1 in. Galvo Head Dimensions: 4.7x 3.8x3.7 in.

DB25 Cable Length: 9'2 (2.8 m). 1 x RC7110 Galvo Head. 1 x DB25 Serial Cable.

1 x 15V Power Supply. Master, AmericanExpress, Discover, Google Pay.

Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer.

Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging.

We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.

Return request need to be within 30 days of receipt. Feedback as much as you do. If for some reason there is.

As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.