OMTech 50W Metal Marking Machine 200x200 Fiber Laser Engraver with Rotary Axis

  
OMTech's 50W fiber laser engraver is your ultimate resource for engraving words, logos, pictures, barcodes, and more on metal including personalized gold and silver jewelry! And other materials with quick turnaround and perfect accuracy. Our device's state-of-the-art air-cooled fiber laser avoids the tetchiness, fragility, and water-based mess of CO2 laser tubes. Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. The Sino-Galvo galvanometric system and compact F? Field lens ensure quick work with less than 1% distortion from your design.

The built-in red dot locators allow you to precisely adjust the height of the laser arm to quickly find the exact focus for various materials. With the optional rotary axis, you are able to mark on curved surfaces. The machine is controlled by its included copy of EzCad2, compatible with Windows 7, 8, and 10. For all your projects marking and cutting metal, rubber, leather, and more, you can do no better.

NOTE that this device has an open worktable. It comes with one pair of protective eyewear but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Get the most out of your laser engraving equipment with OMTech! Acrylic, Hard Plastics, Brick, Granite, Marble, Tile, Aluminum, Gold, Silver, Stainless Steel, Brass, Titanium, Tungsten. Enjoy stable dependable operation with an MTTF over 100,000 hours thanks to this engraver's solid-state laser source.

Its 1064 nm wavelength provides exceptional metal marking, with a 65 µm spot able to engrave with smooth and delicate edging, minimal additional processing, and no waste of materials. The laser arm's Sino-Galvo drive and scanning system provides outstanding accuracy and works with the F? Lens to produce both fast and stable marking of flat surfaces at speeds as fast as 275.6 inches per second (7000 mm/s). Lens creates vivid markings on flat surfaces by maintaining a consistent, focused laser spot size across its 7.9? Producing less than 1% distortion, it flawlessly executes intricate designs with unbelievable precision. The dependable Beijing JCZ Tech control board organizes all of the aspects of this long-lasting multifunctional fiber laser marker and keeps them humming along. The workbed is compact and lightweight with a simple interface. The built-in grid allows convenient and safe adjustment of the laser's position. Its M5 holes can be fitted with positioning bars to keep your material just where you need it. Your EzCad2-based fiber laser engraver works with LightBurn's latest galvo functionality on Windows, MacOS, and Linux systems to let you create even the most intricate patterns easily. Visible laser pointers let you focus the invisible marking ray quickly and easily. The scanning lens also provides a clear, safe red light preview of your pattern's outline for convenient positioning. Your fiber laser comes with a bundled edition of EzCad2 engraving software compatible with Windows XP, Vista, 7, 8, and 10 and a wide range of graphics formats. Create marking magic at the push of a button! Our engraver comes with built-in support for standard rotary axes (not included) with 4-pin connectors. Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical surfaces. Separately grounded for your safety, the scanner, laser source, and rotary axis have separate power buttons. The access key precludes any unauthorized use of your laser, and the circuit breaker is ready in case of emergencies. For even greater protection, this transparent acrylic cover can be purchesed separately, with its sepia tint filtering out engraving laser wavelength and protecting you and bystanders. The built-in interlock will automatically kill the laser when the cover is opened. A pair of OD4 laser glasses come included to protect your eyes from the 1064 nm beam of this laser, as well as offering protection from other alexandrite, diode, and neodymium (Nd:YAG) lasers. Marking Area: 7.9×7.9 in. Compatible Image Software: AutoCAD, CorelDraw, Illustrator, Photoshop, etc. Expected Service Life: 100,000 hr. Marking Depth(Depend on material): 0.004 in. Marking Speed: 275.6 ips (7000 mm/s).

Positioning Accuracy: ±0.1 µm. Compatible Materials: All Metals & Some Non-Metal Materials such as Leather, Hard Plastics, etc. 1 x 50 Watt Fiber Laser Marking Machine. 1 x USB Flash Drive (with Software).

1 x Hex Wrench Set. If the weight of your order exceeds 150 lbs. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.

Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products.

We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California.

Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours.

One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in this country: US. This item can be shipped to United States.

1. Feature: ESCP
2. Brand: OMTech
3. MPN: MX7979-50S
4. Engraving Method: Laser
5. Material: All Metals & Some Non-Metal Materials
6. Power: 50 W
7. Machine Operation: Computerized
8. Model: LYF-50W
9. Laser power supply: 110V/60Hz
10. Output Power: 50W
11. Marking Area: 7.9 × 7.9 in.
    (200×200 mm)
12. Laser Source: MAX
13. Galvanometer Mirror: Galvo-Tech
14. Field Lens: Fθ
15. Mainframe: BJJCZ Control Board
16. Provided Software: EzCad2
17. Compatible Image Software: AutoCAD, CorelDraw, Illustrator, Photoshop, etc.
18. Expected Service Life: 100,000 hr.
19. Laser Wavelength: 1064nm
20. Modulation Frequency: 50–100 kHz
21. Max. Marking Depth（Depend on material）: 0.004 in. (0.1 mm)
22. Max. Marking Speed: 275.6 ips (7000 mm/s)
23. Positioning Accuracy: ±0.1 μm
24. UPC: 797434252333