OMTech 100W 28x20 in. CO2 Laser engraver Cutter Etcher with CW5000 Water Chiller

OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! This laser cutting and engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale.

Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status.

Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport.

Check out our many Accessories and Parts to go along with your laser machine! The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks. 1 x Laser Engraver Machine. 1 x USB Type-A to Type-A Cable.

1 x Ethernet to Ethernet Cable. 1 x Stainless Steel Clamp. Engraving Depth: 0.25 in. Workbed Height Range: 9 in.

Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s).

Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser. Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord.

Machine Dimensions: 40.2×25.6×24.8 in. Laser Wavelength: 10.6 µm.

Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in.

If you must modify your. Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.

Parts must be resaleable and in the original packaging. We cannot take back used products.

We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech 100W CO2 Laser Engraver Combining ease of use with advanced capability, this intuitive 100W CO2 laser engraver delivers professional results at a fraction of the cost.

Equipped with a powerful 100-watt water-cooled laser tube, high-precision stepper motor, and a top-quality Ruida LCD control board, it features our largest engraving surface (28" x 20") with a height-adjusting lift table and dual pass-through doors to accommodate oversized and irregular-shaped objects, making it one of our most highly capable engraving machines. Simply plug in the USB connector to your computer system and you're ready to start your laser engraving story! Laser Tube Lifetime: 100W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10-40% = 7,000-8,000 Hours Moderate Power 40-70% = 5,000-6,500 Hours High Power 70-100% = 3,000-4,000 Hours.

Compatible Materials: Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium Cannot cut hardwoods like mahogany CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification.

The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. Two-way pass allows you to feed material into the workbed from the front or back and cut materials larger than your bed size by sliding them through the cabinet. Our 1450 mm EFR F4 CO2 laser tube provides 100W of power for up to 4000 hours or lasts twice as long when consistently used at lower settings. (500×700 mm) workbed gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more-even before you open the integrated pass-through doors that permit you to work on even larger pieces!

This powerful laser engraver comes with an industrial-strength water chiller to keep the laser tube nice and cool no matter your project. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.

Close the cover and press Start to resume your work. A crystal-clear LCD display provides real-time information about the device's electric current and autocorrects faults, reducing damage to your laser tube and power supply in the rare case of improper ammeter connections. 1 x Laser Engraver Machine 1 x CW-5000 Water Chiller 1 x Water Pump 1 x Storage Tank 1 x Ethernet to Ethernet Cable 1 x Grounding Wire 1 x Venting Exhaust Duct 4 ft.

Length 2 x Water Hoses 1 x USB Type-A to Type-A Cable. 1 x USB Drive with Software 1 x Stainless Steel Clamp 10 x Hex Wrenches 1 x Double-sided Tape 1 x Power Cord 1 x Accessory Bag 2 x Keys 1 x Silicone Sealant 1 x Instruction Manual. MPN: MF-2028-100 Model: SH-G570 Input Power: 110V/60Hz AC Processing Area: 20×28 in.

Engraving Depth: 0.4 in. (10 mm) Workbed Adjustment: Manual Workbed Height Range: 9 in.

(230 mm) Front/Back Pass Size: 32.87×3.94 in. Engraving Speed: 23.6 ips (600 mm/s) Max.

Cutting Speed: 15.7 ips (400 mm/s) Included Software: RDWorks 8, CorelLaser Graphic Operating Modes: Optimized Raster, Vector, and Combined Transfer Interface: Flash Drive, USB Cord, Ethernet Cord Net Weight: 331 lb. (150 kg) Machine Dimensions: 47.2×34.3×36.6 in.

Rated Power: 100W Laser Tube Model: EFR F4 Laser Wavelength: 10.6 µm Laser Tube Diameter: 3.1 in. (80 mm) Laser Tube Length: 57 in. Focal Lens Diameter: 18 mm Focal Length: 2½ in. (63.5 mm) Mirror Diameters: 25 mm. Model: CW-5000 Material: Steel, ABS, Copper Color: Red, Black Tank Capacity: 1.6 gal. (6 L) Current: 3.5-6.5A Compressor Power: 0.8 hp (0.6 kW) Water Pump Power: 30W Refrigerant: R410A Refrigerating Capacity: 3035 BTU/hr. Set Temperature Stability: ±0.9°F (±0.5°C) Max. Flow: 2.6 gpm 10 L/min. (12 m) Inlet/Outlet Diameter: 0.4 in. (1 cm) Overall Dimensions: 22 x 11.4 x 17 in. (56x29x43 cm) Net Weight: 54 lb. (24.5 kg) Certification: CE, FCC. If the weight of your order exceeds 150 lbs. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours.

One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "seriouswholesaler" and is located in this country: US. This item can be shipped to United States.

Feature: ESCP
Brand: OMTech
MPN: MF-2028-100E
Engraving Method: Laser
Type: Engraving Machine
Power: 100W
Machine Operation: Computerized
Model: SH-G570
Laser Power Supply: 110V/60Hz AC
Engraving/Cutting Area: 20″ × 28″ (50×70 cm)
Engraving/Cutting Thickness: 0–⅘″ (0–20 mm)depends on materials
Workbench Adjustment: Manual
Workbed Adjustable Height: 9.1 in.
Engraving Speed: 23.6 in. Cutting Speed: 15.75 in. (40 cm/s)
Graphic Operating Modes: Optimized Raster, Vector, and Combined
Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
Net Weight: 406 lb. (184 kg)
Machine Size: 49.2×33.94×36.6 in. (126×87×93 cm)
Rated Power: 100W
Laser Tube Model: EFR F4
Laser Wavelength: 10.60 μm
Laser Tube Diameter: 3.15 in. (80 mm)
Laser Tube Length: 57 in.
(1450 mm)
Laser Tube Warranty Time: 12 Month
Focal lens Dia: 20 mm
Focal lens FL: 2.5 in.
Mo mirror Dia: 25mm
Max. Engraving Depth: 0.4 in.

(10 mm)
UPC: 797434207333