OMTech 100W 28x20 70x50cm CO2 Laser Engraver Cutter Engraving Cutting Machine

  
19.5" x 27.5" (500 x 700mm) engraving/cutting area 47" x 34" x 37 (119 x 86 x 91cm) overall dimensions Net Weight 330.7 lb. (150 kg) Tackle larger projects with ease The detachable base allows you to transport the machine through smaller door frames.

The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included) RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista. The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included) Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into. RD files for laser processing. 4-Pin Port connection for rotary axis devices.

The integrated power supply features increased response speed, performance, and cutting power - it's beaming with possibilities! A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply. Cut up to 10 mm?? Thick acrylic/plexiglass Uses standard 110V AC power connection.

100W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10-40% = 7,000-8,000 Hours Moderate Power 40-70% = 5,000-6,500 Hours High Power 70-100% = 3,000-4,000 Hours. HIGH LASER POWER: This laser engraving and cutting machine comes with a 100W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer. RUIDA DIGITAL CONTROLLER: The intuitive control panel with digital display allows adjustment of laser head positions and power dimensions, as well as document viewing and final image edits. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process.

Plus, it's equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. TWO-WAY PASS-THROUGH: There's always extra room! Equipped with 29"W x 3.75"H front and rear pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60-70°F (16-21°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation. Package Includes: 1 x Laser Engraver Machine 1 x Water Pump 1 x Ethernet to Ethernet Cable 1 x Grounding Wire 1 x Venting Exhaust Duct 4 ft. Length 2 x Water Hoses 1 x User Manual (English) 1 x USB Type-A to Type-A Cable 1 x USB Drive with Software 1 x Stainless Steel Clamp 10 x Allen Wrenches 1 x Double-sided Tape 1 x Power Cord 1 x Accessory Bag 2 x Keys 1 x Silicone Sealant.

FDA Compliant CE Certification ISO9001 Quality Certification One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. Compatible Materials: Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. Two-way pass allows you to feed material into the workbed from the front or back and cut materials larger than your bed size by sliding them through the cabinet.

The Beehive-Pattern Cutting Platform offers stability, noise reduction, and heat resistance for smaller items, while the Aluminum Knife Cutting Platform offers adjustable height and intense rigidity for larger items like acrylic material. An air compressor mounted on the laser head blows away all smoke, dust, and sparks to protect your laser lens and extend its service life. It comes pre-installed, so it's ready to go as soon as you open the box.

One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online. (50×70 cm) workbed gives you plenty of space even before you open the integrated pass-through doors that permit you to work on even larger materials including wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more! The emergency stop immediately cuts the laser and stops all moving parts to minimize accidents. The multi-window acrylic glass cover allows you to observe laser processes and correct misplacements, plus, the sepia tint protects your vision from the laser light.

The laser will automatically cease engraving actions upon opening the cover door. Simply close and press the start button to continue operations.

Great for easy maintenance & troubleshooting, the digital LCD display monitors laser power, displays electric current and externally auto-judges fault to reduce laser tube damage in the rare case of poor ammeter wiring connections. (0-10 mm)depends on materials. Optimized Raster, Vector, and Combined.

Flash Drive, USB Cord, Ethernet Cord. 47.2×34.3×36.6 in. If you must modify your. Master, AmericanExpress, Discover, Google Pay.

Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer.

Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.

Return request need to be within 30 days of receipt. Feedback as much as you do. If for some reason there is. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in this country: US.

This item can be shipped to United States.

1. Brand: OMTech
2. MPN: MF-2028-100E
3. Engraving Method: Laser
4. Type: Engraving Machine
5. Power: 100W
6. Machine Operation: Computerized
7. Model: SH-G570
8. Laser Power Supply: 110V/60Hz AC
9. Engraving/Cutting Area: 20″ × 28″ (50×70 cm)
10. Engraving/Cutting Thickness: 0–⅘″ (0–20 mm)depends on materials
11. Workbench Adjustment: Manual
12. Workbed Adjustable Height: 9.1 in. Engraving Speed: 23.6 in. Cutting Speed: 15.75 in.

    (40 cm/s)

13. Graphic Operating Modes: Optimized Raster, Vector, and Combined
14. Machine Size: 49.2×33.94×36.6 in. (126×87×93 cm)
15. Rated Power: 100W
16. Laser Tube Model: EFR F4
17. Laser Wavelength: 10.60 μm
18. Laser Tube Diameter: 3.15 in. (80 mm)
19. Laser Tube Length: 57 in. (1450 mm)
20. Laser Tube Warranty Time: 12 Month
21. Focal lens Dia: 20 mm
22. Focal lens FL: 2 in. (50.8 mm)
23. Mo mirror Dia: 25mm
24. Max.

    Engraving Depth: 0.4 in. (10 mm)

25. UPC: 797434206527