Pre-Owned AF5070-150 150W CO2 Laser Engraver Cutting Machine with 50x70 Workbed

  
OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! This laser cutting and engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks.

Custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision.

In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. Check out our many Accessories and Parts to go along with your laser machine!

The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks. 1 x Laser Engraver Machine.

1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Stainless Steel Clamp. Engraving Depth: 0.25 in. Workbed Height Range: 9 in. Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s).

Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser.

Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord.

Machine Dimensions: 40.2×25.6×24.8 in. Laser Wavelength: 10.6 µm.

Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in. If you must modify your. Special circumstances will be stated clearly in the listing.

Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.

Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.

Return request need to be within 30 days of receipt. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended.

The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended. The device has minimal signs of use but is fully operational and functions 100% as intended. PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine. This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

View condition examples of previous Pre-Owned models please see picture above. 150W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 11,000-12,000 Hours. Moderate Power 40-70% = 9,000-10,000 Hours.

High Power 70-100% = 7,000-8,000 Hours. Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber. Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium. Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities. Compatible with third party software like LightBurn and AutoCAD.

Front & back and 53?? On either side-allows you to feed material into the workbed from any direction, letting you cut materials larger than the bed size by sliding them across the engraving table. The laser head is equipped with an automatic focus adjustment that you can use directly from the control panel, eliminating tedious manual adjustment. Powerful YL A8S Laser Tube.

Our 1850 mm CO2 laser tube provides 150W of power for up to 7000 hours or up to 12000 hours of operation when consistently used at lower settings. An industrial-strength CW-5000 water chiller is built into this powerful laser engraver to keep the laser tube nice and cool no matter your project.

The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts in the event of accident.

1 x 150W Laser Tube. 1 x Venting Exhaust Duct 4 ft. 1 x USB Flash Drive (with Software).

1 x Tube of Silicone Insulation. MPN: AF5070-150 Model: SH-G1813 Input Power: 110V/60Hz AC Processing Area: 50×70 in. Engraving Depth: 0.8 in. (20 mm) Workbed Adjustment: Electric Workbed Height Range: 5.9 in. (150 mm) Front/Back Pass Size: 75×2.05 in.

(1905×52 mm) Side/Side Pass Size: 53.94×0.71 in. Engraving Speed: 23.6 ips (600 mm/s) Max.

Cutting Speed: 15.7 ips (400 mm/s) Included Software: RDWorks 8, CorelLaser Graphic Operating Modes: Optimized Raster, Vector, and Combined Transfer Interface: Flash Drive, USB Cord, Ethernet Cord Net Weight: 1323 lb. (600 kg) Machine Dimensions: 96×76.4×37.4 in.

Laser Tube Diameter: 3.1 in. Laser Tube Length: 72.8 in. Focal Lens Diameter: 20 mm. If the weight of your order exceeds 150 lbs. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California.

Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together.

We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "omtechlaser" and is located in this country: US.

This item can be shipped to United States.

1. Brand: OMTech
2. MPN: AF5070-150
3. Engraving Method: Laser
4. Type: Engraving Machine
5. Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
6. Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
7. Power: 150 W
8. Machine Operation: Computerized
9. Personalize: Yes
10. Model: SH-G1813
11. Input Power: 110V/60Hz AC
12. Processing Area: 50×70 in. Engraving Depth: 0.8 in. (20 mm)
13. Workbed Adjustment: Electric
14. Workbed Height Range: 5.9 in.
    (150 mm)
15. Front/Back Pass Size: 75×2.05 in. (1905×52 mm)
16. Side/Side Pass Size: 53.94×0.71 in. Engraving Speed: 23.6 ips (600 mm/s)
17. Max. Cutting Speed: 15.7 ips (400 mm/s)
18. Included Software: RDWorks 8, CorelLaser
19. Graphic Operating Modes: Optimized Raster, Vector, and Combined
20. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
21. Net Weight: 1323 lb. (600 kg)
22. Machine Dimensions: 96×76.4×37.4 in. (244×194×95 cm)
23. Rated Power: 150W
24. Laser Tube Model: Yongli A8S
25. Laser Wavelength: 10.6 μm
26. Laser Tube Diameter: 3.1 in.

    (80 mm)

27. Laser Tube Length: 72.8 in. (1850 mm)
28. Laser Tube Warranty: 1 Year
29. Exp.
    Service Life at <40% / 40–70% / >70% Power: 11000–12000 / 9000–10000 / 6000–7000 hr.
30. Focal Lens Diameter: 20 mm
31. Focal Length: 2½ in. (63.5 mm)
32. Mirror Diameters: 25 mm
33. Max Power: 80W