OMTech 12x20 50W CO2 Laser Engraver Cutter Marker with Extreme Accessories A

  

Bring your ideas to life with OMTech's laser engraver series! This laser cutting and engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. The included barrel rolling rotary axis attachment even allows easy work with curved and cylindrical surfaces like corks, ceramic mugs, and glass bottles with a 1" to 6" diameter. Get marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before with our intuitive controls, custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale.

Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. Check out our many Accessories and Parts to go along with your laser machine! 50W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 1,700-2,000 Hours. Moderate Power 40-70% = 1,300-1,500 Hours. High Power 70-100% = 800-1,000 Hours.

Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber. Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium. Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.

LightBurn communicates directly with your OMTech CO2 Laser Engraver and most other DSP controlled laser engraving machines. Take advantage of a complete set of composition tools to artistically draw, arrange and edit shapes to create beautiful vector graphic designs for breathtaking engravings. A rotation axis comes included to get you right to work easily marking and engraving irregular, round, and cylindrical objects 1?

This powerful laser engraver comes with an industrial-strength water chiller to keep the laser tube nice and cool no matter your project. The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. Two-way pass allows you to feed material into the workbed from the front or back and cut materials larger than your bed size by sliding them through the cabinet. One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online.

Upgrade your laser engraving experience with our autofocus sensor kit. Our package kit comes with all the items you'll need to convert your manual focusing laser cutting work station into an automatic one. A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes.

The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. The E-Stop safety button immediately stops the machine in case of emergency.

Engraving Depth: 0.25 in. Workbed Height Range: 4.7 in. Front/Back Pass Size: 25×1.46 in.

Engraving Speed: 23.6 ips (600 mm/s). Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser.

Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 41×25.6×19.7 in. Laser Wavelength: 10.6 µm. Laser Tube Diameter: 2 in.

Laser Tube Length: 34.6 in. Product Dimensions:6.1×14.9×3.1 in. Distance between Rollers:0.2-2.9 in. Roller Length 10.4 in. Fixed Roller Height 2.9 in.

Net Weight 3.5 lb. 1 x Laser Engraver Machine. 1 x CW-5200 Water Chiller. 1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Tube of Silicone Insulation. 1 x Autofocus Sensor Kit. 1 x Venting Exhaust Duct 4 ft. 1 x 4G USB Drive with Software. Compressor Power: 0.9 hp (0.68kW).

Water Capacity: 1.6 gal. Flow: 2.6 gpm 10L/min. Product Dimensions: 22x11.4x17 in. Inlet/Outlet Port Diameter: 2/5 in. 1 x Alarm Signal Output Plug.

1 x Spare Fuse (held near the rear power socket). If the weight of your order exceeds 150 lbs. Special circumstances will be stated clearly in the listing.

Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.

Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving.

Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "orionmotortech" and is located in this country: US. This item can be shipped to United States.

1. Brand: OMTech
2. MPN: MF-1220-50E
3. Model: SH-G350
4. Input Power: 110V/60Hz AC
5. Processing Area: 12×20 in. Engraving Depth: 0.25 in. (6 mm)
6. Workbed Adjustment: Manual
7. Workbed Height Range: 4.7 in. (120 mm)
8. Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s)
9. Max. Cutting Speed: 15.7 ips (400 mm/s)
10. Included Software: RDWorks 8, CorelLaser
11. Graphic Operating Modes: Optimized Raster, Vector, and Combined
12. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
13. Net Weight: 165 lb. (75 kg)
14. Machine Dimensions: 41×25.6×19.7 in. (104×65×50 cm)
15. Rated Power: 50W
16. Laser Wavelength: 10.6 μm
17. Laser Tube Diameter: 2 in.

    (50 mm)

18. Laser Tube Length: 34.6 in. (880 mm)
19. Laser Tube Warranty: 6 Months
20. Exp. Service Life at <40% / 40–70% / >70% Power: 1700–2000 / 1300–1500 / 800–1000 hr.
21. Focal Lens Diameter: 18 mm
22. Focal Length: 2 in. (50.8 mm)
23. Mirror Diameters: 25 mm
24. UPC: 797434243935