Net Weight: 5 kg 11 lb. Cut up to 10 mm (?? 100W Borosilicate Glass CO2 Laser Tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows.
Low Power 10-40% = 11,000-12,000 Hours. Moderate Power 40-70% = 8,000-10,000 Hours. High Power 70-100% = 4,500-5,000 Hours. EASY TO INSTALL: The preinstalled YL cathode and anode terminal connections with a full metal structure allow safer and faster replacement. SAFE AND SOUND: The inner tube for the engraving laser beam is surrounded by built-in water tubing and a hermetically sealed outer tube to keep it cool and high functioning. Ports at either end allow easy connection with your water pump or industrial water chiller, and a protective cap shields the high-voltage anode from any shorts or arcing.1 x H4 100W Laser Tube. Replace your old tube with OMTech's heavy-duty H4 laser tube. Made of tough borosilicate glass, this durable 100W CO2 laser tube leaves competitors behind. Designed for medium-sized CO2 laser engraving machines, it is 4'9" (1450 mm) long and 2.4" (60 mm) in diameter.
It installs quickly and easily: just wrap your power supply's connecting wires around the anode and cathode's connections and hook your water cooling system to the pipe fittings at either end. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated.Master, AmericanExpress, Discover, Google Pay. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.
Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products.
We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. Feedback as much as you do.If for some reason there is. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page.