OMTech K40 40W CO2 Laser Tube for Laser Engraving & Cutting Machines 1,300 hr

  

Our CO2 Laser Tubes produce stable laser beams for more precise markings on a wide variety of materials. Optimal Operating Current: 10-13 mA.

Cut up to 1/8 thick plywood and acrylic/plexiglass. 40W Hermetic CO2 Glass Tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance.

PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 1,500-2,000 Hours. Moderate Power 40-70% = 1,000-1,200 Hours. High Power 70-100% = 400-600 Hours. Product Length: 27.56 (700mm).

Net Weight: 2.2 lb. The water outlet and inlet allow efficient flow of cooling water. Made out of borosilicate glass, copper, and plastic. Optimum cooling water temperature between 60-70°F (15-19°C). 1 x 40W Laser Tube. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated. Master, AmericanExpress, Discover, Google Pay.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. Feedback as much as you do.

If for some reason there is. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page.