OMTech CW5200 Industrial Water Chiller with 2 Pack CO2 Laser Antifreeze Coolant

  
Looking for a powerful water chiller to keep your laser engraving machine cool during use? OMTech's CW-5200 laser water chiller is your best choice! The spacious 1.6-gallon (6L) water tank runs at 2.6 gpm to remove heat from your CO2 laser tube as it works. Its 0.9hp compressor uses R410a refrigerant to keep your water-cooling system within 0.3? It can cool up to 5186 BTUs per hour, cooling down your laser cutter and engraver up to 150W. Get your CO2 laser ready for winter with OMTech's laser antifreeze coolant!

Our self-developed 1 gallon heat transfer fluid is composed of ethylene glycol, deionized water, and corrosion inhibitors to give your CO2 laser all-around protection against freezing, overheating, and corrosion for lasting performance. A perfect match for OMTech's water chiller, this safe, clean, and nontoxic laser antifreeze for winterizing boasts extra low conductivity to keep your laser tube from freezing even at -31°F, and continuously removes excess heat for stable laser engraving without reducing the output power. Prediluted for your immediate use, our universally compatible antifreeze is ready to use for all CO2 lasers, from laser engravers to laser cutters to hybrid lasers. NOTE that the mixed use with other laser coolant may lead to chemical reactions; using vehicle coolant for your laser will deteriorate its output power and lifespan. For best results, replace the coolant every 3 months.

POWERFUL COOLING: OMTech's CW-5200 water chiller uses standard R410a refrigerant to keep laser cutting and engraving machines up to 150W nice and cool during use; its 2.6 gpm flow rate and 0.9hp compressor can cool up to 5186 BTU per hour. CAPACIOUS TANK: The 1.6-gallon (6L) water tank is enclosed to reduce evaporation and provide long-term service between refills; the clear observation window lets you know when it's time to top off. HIGH-GRADE PORTS: Our water cooler's inlet and outlet ports are made of premium brass for long-term corrosion-free performance; their careful design prevents any issues with leaks as it operates. SAFE OPERATION: This industrial water cooling system includes internal sensors to keep temperatures within 0.3? Of constant and to let you know via digital display, indicator lights, and alarms when everything's going smoothly and when it's time to make adjustments.

Compressor Power: 0.9 hp (0.68kW). Water Capacity: 1.6 gal. Flow: 2.6 gpm 10L/min. Product Dimensions: 22x11.4x17 in.

Inlet/Outlet Port Diameter: 2/5 in. 1 x Alarm Signal Output Plug. 1 x Spare Fuse (held near the rear power socket). CO2 LASER COOLANT: OMTech's 1.1 gallon CO2 laser antifreeze coolant protects your laser tube from freezing and bursting even at -31F and quickly removes excess heat to keep your engraver humming along. ALL-AROUND PROTECTION: This safe and clean ethylene glycol based coolant and heat transfer fluid with corrosion inhibitors resists freezing, overheating, and erosion to provide long-lasting efficient cooling.

UNIVERSAL COMPATIBILITY: Our laser engraver liquid cooler boasts ultimate versatility, compatible with all CO2 laser cutting machine water chillers and cooling tanks. PERFECT CHILLER MATCH: Use this blue water cooling liquid for CO2 laser tubes to reduce oxidation and dust, allowing it to extend the tube's life to ensure your engraver's stable operation. LOW CONDUCTIVITY: Our laser protective coolant boasts ultra low conductivity of 10µS/cm to prolong your laser cutter's service life without decreasing its output power.

READY-TO-USE SOLUTION: This prediluted laser water coolant offers immediate use; simply clean the water cooling system with distilled or deionized water and add the coolant to your water tank or chiller. Composition: Ethylene Glycol, Deionized Water, Corrosion Inhibitors. PH Value: 7.3-8.3. Boiling Point: 226.4°F (108°C). 4 L, 1.1 gal.

2 x CO2 Laser Coolant. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "orionmotortech" and is located in this country: US. This item can be shipped to United States.

1. Brand: OMTech
2. MPN: OMT-5200
3. Product: Water Chiller
4. Temperature Control: Refrigerated
5. Model: CW-5200
6. Input Power: 110V/60Hz AC
7. Current: 4.6–6.5A
8. Tank Capacity: 1.6 gal.

   (6L)

9. Refrigerant: R410a
10. Refrigerant Charge: 0.6 lb. (280 g)
11. Compressor Power: 0.93 hp (0.68 kW)
12. Refrigerating Capacity: 5186 BTU/hr. (1.52 kW, 1307 kcal/hr. Pumping Lift: 29.5 ft.)
13. Inlet/Outlet Diameter: ⅖″ (1 cm)
14. Product Dimensions: 22″ × 11.4″ × 17″ (56×29×43 cm)
15. Net Weight: 57.3 lb.

    (26 kg)

16. Package Dimensions: 27″ × 16″ × 21.65″ (68×41×55 cm)
17. Gross Weight: 64 lb. (29 kg)
18. UPC: 797434256201