Secondhand 40W CO2 Laser Engraver K40+ Motherboard f Lightburn&Rotary Axis Comp

  
OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series! This laser cutting and engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status.

Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. Check out our many Accessories and Parts to go along with your laser machine! The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks. 1 x Laser Engraver Machine.

1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Stainless Steel Clamp. Engraving Depth: 0.25 in. Workbed Height Range: 9 in.

Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s).

Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser. Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 40.2×25.6×24.8 in.

Laser Wavelength: 10.6 µm. Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in. If you must modify your. Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products.

We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt.

Ready to take your engraving to the next level? Get more out of your low strength engraver with the K40+ control board! Purpose built for our 20W, 30W, and 40W desktop laser engravers, this circuit board comes preflashed with open source Smoothie firmware and additional signal ports that work just as well with most CNC routers. The ports handle our machines' default stepper motors and axis limits while providing support for even stronger add-on motors and vent fans if needed. Further, this 24V logic board will allow your K40 laser to direct rotary axes around the U axis, adjust your workbed height along the Z axis for rapid autofocusing, and activate pressurized air assists on your laser head for safer work.

Most importantly, this customized smoothieboard will allow your K40 box to work with LightBurn running on any current and common operating system-Windows, Linux, or MacOS-so you can do precision grayscale work with any K40 laser cutter. Upgrade your box and your craft with the K40+ motherboard today! Model: K40+ CPU Type: 32-Bit ARM Cortex-M3 Dimensions: 3.8 x 2.8 x 0.5 in. (9.8x7.3x1.2 cm) Voltage: 24V DC Input/Output Signals: 5V DC Max. Frequency: 120MHz Included Firmware: Smoothieware Supported Software: LightBurn Operating Temperature: 14 to 104 F (-10 to 40 C) Net Weight: 1.7 oz.

We have three warehouses located in Anaheim, CA, Memphis, TN, and Dayton, NJ. Your kind consideration is highly appreciated. We will surely take care of u.

Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving.

Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered.

Master, AmericanExpress, Discover, Google Pay. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "acautoparts04" and is located in this country: US. This item can be shipped to United States.

1. Feature: ESCP
2. Brand: OMTech
3. MPN: K40+
4. Engraving Method: Laser
5. Type: Parts/Accessories
6. Power: 40 W
7. Machine Operation: Computerized
8. CPU Type: 32-Bit ARM Cortex-M3
9. Dimensions: 3.8 x 2.8 x 0.5 in. (9.8x7.3x1.2 cm)
10. Voltage: 24V DC
11. Input/Output Signals: 5V DC
12. Max.

    Frequency: 120MHz

13. Included Firmware: Smoothieware
14. Supported Software: LightBurn
15. Operating Temperature: 14 to 104 F (-10 to 40 C)
16. Net Weight: 1.7 oz.