Secondhand 2 Tube 100W CO2 Laser Engraver Autolift Air Assist 4 Pass-Throughs. Bring your ideas to life with OMTech's laser engraver ZF series! Laser engraver continues to uphold our previous high standards with its software suite (RDWorks 8 & CorelLaser), Ruida control panel, LCD display, large 35x50 inch working area, and pass-through doors that allow even larger pieces to be worked on.
To improve your efficiency and throughput, this laser cutting and engraving machine further employs TWO industrial-grade laser tubes and heads so that you can mark, engrave, and cut your designs on plastic, rubber, leather, wood, and more TWICE as quickly. Simultaneously engraving your designs, they will double your output with no loss of quality, durability, or our product's usual long service life. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality at double your current pace. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. With OMTech's precision engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop.
To go along with your laser machine! Four-way pass-through doors allow the workbed to handle materials larger than the bed itself from any direction. This engraver includes 2 workbeds. One honeycomb and one aluminum blade.Either workbed can be automatically raised and lowered at the push of a button for more efficient processing. One USB port reads flash drives while the other connects directly to your PC via dedicated cable.
The Ethernet port allows you to work remotely online. An air compressor mounted on the laser head blows away all smoke, dust, and sparks to protect your laser lens and extend its service life. It comes pre-installed, so it's ready to go as soon as you open the box.
130 cm workbed gives you plenty of space even before you open the integrated pass-through doors that permit you to work on even larger materials including wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more! The Air Assist ventilation function directs hazardous debris away from the engraving surface and into the waste collection bin, which takes only seconds to empty manually. Internal & External Vent Pipes. Alongside the usual external vent, a retractable pipe inside the machine.
Connecting to the waste hopper below the engraving table. Improves ventilation efficiency and extends the service life of your reflective lenses. DUAL DIGITAL LASER POWER SUPPLIES. Two crystal-clear LCD displays on the surface of the machine monitor the electric current, easily adjusted by nearby knobs, visualizing the working current and power. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes.The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts to minimize accidents.
Equiped with two 100W laser tubes, this laser engraver works with double efficiency. Each can also operate as high as 115W for short periods when you need a bit more oomph. Working together, these two laser heads. Supported by separate 80W laser tubes.
Ensure improved productivity and efficiency when engraving a series of objects. Engraving Depth: 0.4 in.
Workbed Height Range: 5.9 in. Front/Back Pass Size: 55.31×1.97 in.
Side/Side Pass Size: 38.19×0.71 in. Engraving Speed: 23.6 ips (600 mm/s). Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser.Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 76.4×60.6×37.4 in. Laser Tube Model: EFR F4. Laser Wavelength: 10.6 µm.
Laser Tube Diameter: 3.1 in. Laser Tube Length: 57 in.
Focal Lens Diameter: 20 mm. 2 x 100W Laser Tubes.1 x Tube of Silicone Insulation. 1 x Roll of Double-Sided Tape. 1 x USB Flash Drive with Software. 1 x Rotary Axis (optional). Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber. Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium. Cannot cut hardwoods like mahogany. CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.