OMTech Water Chiller CW3000/CW5000/CW5200/CW5202 for CO2 Laser Engraver Cutter

  

Get your CO2 laser ready for winter with OMTech's laser antifreeze coolant! Our self-developed 1 gallon heat transfer fluid is composed of ethylene glycol, deionized water, and corrosion inhibitors to give your CO2 laser all-around protection against freezing, overheating, and corrosion for lasting performance. A perfect match for OMTech's water chiller, this safe, clean, and nontoxic laser antifreeze for winterizing boasts extra low conductivity to keep your laser tube from freezing even at -31°F, and continuously removes excess heat for stable laser engraving without reducing the output power. Prediluted for your immediate use, our universally compatible antifreeze is ready to use for all CO2 lasers, from laser engravers to laser cutters to hybrid lasers. NOTE that the mixed use with other laser coolant may lead to chemical reactions; using vehicle coolant for your laser will deteriorate its output power and lifespan.

For best results, replace the coolant every 3 months. Looking for an efficient way to keep your medium-sized laser engraver machine cool during use? OMTech's heat-radiating CW-3000 water cooler is your best choice!

Instead of using coolant and lots of power to refrigerate the water, its sensors and efficient fans radiate away 50W of heat every time the water begins to rise 1° Celsius. An observation window gauges the machine's water level and lets you know when it's time for a refill. The water inlet and outlet ports are brass for corrosion-free performance and well designed to prevent any leaks. The sensors provide real-time temperature information with a clear digital display, and indicator lights and alarms let you quickly know of any irregularities.

Omtech's CW-5000 water chiller is your best choice to keep your laser engraving and cutting machines cool during use! The spacious 1.6 gallon (6 L) water tank runs at 2.6 gpm to remove heat from your CO2 laser tube as it works. Its 0.8hp compressor uses R410a refrigerant to keep your water-cooling system within 0.9F of a constant temperature. It can cool up to 3035 BTUs per hour, cooling down your laser cutter and engraver to keep it humming along. The sensors provide real-time temperature information with a clear digital display and indicator lights & alarms let you know of any irregularities.

The convenient rubberized handles allow you to carry it around your garage or workshop with ease. Looking for a powerful water chiller to keep your laser engraving machine cool during use? OMTech's CW-5200 laser water chiller is your best choice! The spacious 1.6-gallon (6L) water tank runs at 2.6 gpm to remove heat from your CO2 laser tube as it works.

Its 0.9hp compressor uses R410a refrigerant to keep your water-cooling system within 0.3? It can cool up to 5186 BTUs per hour, cooling down your laser cutter and engraver up to 150W. Looking for a powerful water chiller to keep your laser engraving machines cool during use? OMTech's CW-5202 laser water chiller is your best choice! The spacious 1.6-gallon (6L) water tank runs at 3.2 gpm to remove heat from your CO2 laser tube as it works.

OMTech's CW-6000 laser water chiller is the best choice! The spacious 4-gallon (15L) water tank and a powerful 1120W compressor enable an exceptional cooling capacity of 10700 BTU/hr.

This water chiller's powerful motor and accurate sensors keep water within 0.5°C of your chosen temperature, set either absolutely or relative to the surrounding room. The smart control panel lets you easily set and adjust the temperature needed to your equipment. The sensors provide real-time temperature information, and the alarm output lets you quickly know of any irregularities.

The convenient casters also allow you to move the cooling machine around your workshop to cool your different equipment. CO2 LASER COOLANT: OMTech's 1.1 gallon CO2 laser antifreeze coolant protects your laser tube from freezing and bursting even at -31F and quickly removes excess heat to keep your engraver humming along.

ALL-AROUND PROTECTION: This safe and clean ethylene glycol based coolant and heat transfer fluid with corrosion inhibitors resists freezing, overheating, and erosion to provide long-lasting efficient cooling. UNIVERSAL COMPATIBILITY: Our laser engraver liquid cooler boasts ultimate versatility, compatible with all CO2 laser cutting machine water chillers and cooling tanks. PERFECT CHILLER MATCH: Use this blue water cooling liquid for CO2 laser tubes to reduce oxidation and dust, allowing it to extend the tube's life to ensure your engraver's stable operation. LOW CONDUCTIVITY: Our laser protective coolant boasts ultra low conductivity of 10µS/cm to prolong your laser cutter's service life without decreasing its output power. READY-TO-USE SOLUTION: This prediluted laser water coolant offers immediate use; simply clean the water cooling system with distilled or deionized water and add the coolant to your water tank or chiller.

Composition: Ethylene Glycol, Deionized Water, Corrosion Inhibitors. PH Value: 7.3-8.3. Boiling Point: 226.4°F (108°C). 4 L, 1.1 gal.

1 x CO2 Laser Coolant. ENERGY-EFFICIENT COOLING: Orion Motor Tech's CW-3000 water chiller radiates heat away rather than using refrigeration to keep your k40 laser engraver nice and cool at a fraction of the usual energy expense; its advanced design uses its 2.6 gpm flow rate and powerful fans to radiate away 50W of heat from your machine for every 1°C rise in water temperature.

CAPACIOUS TANK: The 2.4-gallon (9L) water tank is enclosed to reduce evaporation and provide long-term service between refills; the clear observation window lets you know when it's time to top off. HIGH-GRADE PORTS: Our water cooler's inlet and outlet ports are made of premium brass for long-term corrosion-free performance; their careful design prevents any issues with leaks as it operates. SAFE OPERATION: This industrial water cooling system includes internal sensors to monitor performance and let you know via digital display, indicator lights, and alarms when everything's going smoothly and when it's time to make adjustments.

Flow: 2.6 gpm (10L/min). Inlet/Outlet Port Diameter: 2/5 in. 1 x Alarm Signal Output Plug. 1 x Spare Fuse (held near the rear power socket).

POWERFUL COOLING: Omtech's CW-5000 water chiller uses standard R410a refrigerant to keep laser cutting and engraving machines nice and cool during use; its 2.6 gpm flow rate and 0.8hp compressor cool up to 3035 BTUs per hour 0.89 kW/hr. CAPACIOUS TANK: The 1.6 gallon (6 L) water tank is enclosed to reduce evaporation and provide long-term service between refills; the clear observation window lets you know when it's time to top off. HIGH-GRADE PORTS: Our water cooler's inlet and outlet ports are made of premium brass for long-term corrosion free performance; their careful design prevents any leaks during the efficient water circulation. SAFE OPERATION: This industrial water cooling system includes internal sensors to keep temperatures within 0.9F (0.5C) of constant and let you know via digital display, indicator lights, and alarms when it's time for adjustments.

INNOVATIVE DESIGN: This OMT water chiller is integrated with two powerful cooling fans to dissipate heat with optimal efficiently, ensuring stable and long-lasting performance of your CO2 laser engraving or CNC equipment. Tank Capacity: 1.6 gal.

Compressor Power: 0.8 hp (0.6 kW). Set Temperature Stability: ±0.9°F (±0.5°C). Flow: 2.6 gpm 10 L/min.

Inlet/Outlet Diameter: 0.4 in. Overall Dimensions: 22 x 11.4 x 17 in. 1 x Industrial Water Chiller.

POWERFUL COOLING: OMTech's CW-5200 water chiller uses standard R410a refrigerant to keep laser cutting and engraving machines up to 150W nice and cool during use; its 2.6 gpm flow rate and 0.9hp compressor can cool up to 5186 BTU per hour. CAPACIOUS TANK: The 1.6-gallon (6L) water tank is enclosed to reduce evaporation and provide long-term service between refills; the clear observation window lets you know when it's time to top off. SAFE OPERATION: This industrial water cooling system includes internal sensors to keep temperatures within 0.3?

Of constant and to let you know via digital display, indicator lights, and alarms when everything's going smoothly and when it's time to make adjustments. Compressor Power: 0.9 hp (0.68kW). Water Capacity: 1.6 gal. Flow: 2.6 gpm 10L/min. Product Dimensions: 22x11.4x17 in.

POWERFUL COOLING: OMTech's CW-5202 water chiller uses standard R410a refrigerant to keep laser cutting and engraving machines up to 150W nice and cool during use; its 3.2 gpm flow rate and 0.9hp compressor can cool up to 5186 BTU per hour. Chillers; the ports are also made of premium brass for long-term corrosion-free performance and their careful design prevents any issues with leaks as it operates. Flow: 3.2 gpm 12L/min. POWERFUL COOLING: This CW-6000 water chiller uses standard R410a refrigerant to keep your laser cutting and engraving machines, CNC machines, and laser welding equipment nice and cool during use; its 8.7 gpm flow rate and 1hp compressor can cool up to 10700 BTU per hour.

CAPACIOUS TANK: The 4 gallon (15L) water tank is enclosed to reduce evaporation and provide long-term service between refills; the clear observation window lets you know when it's time to top off. SAFE OPERATION: This industrial water cooling system includes internal sensors to keep temperatures within 0.5°C of constant and to let you know via digital display and alarms when everything's going smoothly and when it's time to make adjustments.

SUPERIOR PORTIBILITY: Our water cooler comes with four high-quality casters for easy maneuverability around your workshop to cool different equipment, while the inlet and outlet ports are made of premium brass for long-term corrosion-free performance. Compressor Power: 1 hp (0.75 kW). Pump Power: 0.73 hp (550W). Temperature Accuracy: ±0.9°F (±0.5°C). Flow: 8.7 gpm 33L/min.

Product Dimensions: 25 x 17 x 28 in. Inlet/Outlet Port Diameter: 1/2 in. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers".

The seller is "freeshipping2you" and is located in this country: US. This item can be shipped to United States.

1. Product Model: CW-6000 Water Chiller 110V
2. Model: Industrial Water Chiller
3. Product: Water Chiller
4. MPN: LKJLX008491556442836
5. Brand: Omtech