OMTech Galvo Scanner Head for Fiber Laser Marker Engraving Marking Machine

  
Have you worn the motors right off your fiber laser's old galvanometer? Is it past time you upgraded your machine's standard galvo head to enjoy a tighter spot size, faster processing, and even greater accuracy? OMTech is here to ensure you have the right accessories for a perfect engraving experience! This RC7110A laser scanning system is the perfect galvo replacement or upgrade for OMTech's 80W & 100. Laser marking machines, with a 10 mm wide laser aperture and M85 thread lens housing.

This compact galvanometer kit comes with the serial cable and new 15V power supply so it's ready for installation on any compatible 1064 nm laser engraver. Once installed, the high-performance rotary motors will convert the instructions from your control computer into precise movements of the X and Y mirrors to mark your text, designs, logos, serial numbers, bar codes, and more across flat surfaces in metal, stone, and hard plastic at speeds up to 157 ips.

The helpful built-in red dot locator keeps setup and positioning fast and convenient, letting you measure twice and cut once faster than ever. With its precise positioning, high resolution, and minimal drift for outstanding linearity, you can do no better. Order OMTech's galvo scanner head kit today, with our superior quality, user-friendly design, and good name ensuring you'll enjoy its use for years to come!

Marking Speed: 157 ips (4000 mm/s). Positioning Speed: 157 ips (4000 mm/s).

Scanning Speed: 18060 rpm (301 cps). Continuous Use: 0.5 mrad. Scale Drift: 22 ppm/°F (40 ppm/°C). Storage Temperature: 14-140°F (-10 to 60°C).

Laser Input Aperture: 0.4 in. Galvo Head Dimensions: 4.7 x 3.8 x 3.7 in. Net Weight: 2.4 lb. 1 x RC7110A Galvo Head. 1 x DB25 Serial Cable.

1 x 15V Power Supply. Perfect as either a replacement or upgrade, this galvo scanner head slots onto OMTech's 80W and 100W fiber laser machines and is compatible with other galvo lasers emitting 1064 nm wavelength beams from 10 mm aperture collimators.

Industry-leading photoelectric sensors control rapid adjustment of the rotary motors, positioning the X and Y axis mirrors above. Engrave your text, logos, designs, bar codes, and more across flat metal, stone, or hard plastic surfaces with pinpoint precision. Responding to input from your control computer and the photoelectric sensors, our galvanometric scanning head positions itself at 157 ips and then marks and engraves at speeds up to 157 ips (4000 mm/s) with high resolution, minimal drift, and outstanding linearity.

The galvo head's built-in red dot indicator produces a clearly visible locator, allowing you to quickly and easily position your material and focus your design before each run; electrical fail-safes include protection against overload, overcurrent, and reversed polarity, ensuring lastingly stable performance.