Accessible, versatile, and portable, you can do no better as you start your laser engraving journey than this powerful little desktop K40 from OMTech! Check out our many Accessories and Parts to go along with your laser machine! 40W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows.
Low Power 10-40% = 1,500-2,000 Hours. Moderate Power 40-70% = 1,000-1,200 Hours. High Power 70-100% = 400-600 Hour. Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium. CO2 lasers only mark bare metals when anodized or treated.
Some PVC-based acrylics can create toxic fumes when lasered. Our digital control panel's LCD display offers clear monitoring of the tube's temperature and easy adjustment during use.
The helpful E-stop button brings everything to an immediate stop when needed. Equipped with a 40W laser tube with a lifespan of up to 2000 hours, this laser engraver provides sufficient energy for engraving and marking non-metallic substrates up to?? Our 40W laser power supply delivers excellent performance with high efficiency and fast response times.Increase the service life and get the most out of your laser tube with our safe, stable, and capable power supply. The red dot pointer quickly indicates engraving locations and marks the machine's laser path to identify correct product positioning, helping you get started quickly and easily. This spacious 2.4-gallon (9L) water tank runs at 2.6 gpm to remove heat for every 1°C rise in water temperature from your 60W below CO2 laser tube as it works. Our engraver comes with built-in support for standard rotary axes (not included) with 4-pin connectors.
Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical surfaces. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Our ammeter shows the amount of current being used by the laser tube in real time to ensure your designs are processed perfectly and help you identify and troubleshoot any problems during operation.Engraving Depth: 0.12 in. Engraving Speed: 13.8 ips (350 mm/s). Supported Operating Systems: Windows 7, 8, 10, & XP. Laser Wavelength: 10.6 µm.
Laser Tube Diameter: 2 in. 1 x 40W CO2 Laser Engraver. 1 x Maintenance Tool Set. 1 x USB Flash Drive (with Software). 1 x Tube of Silicone Insulation.Flow: 2.6 gpm (10L/min). Inlet/Outlet Port Diameter: 2/5 in. 1 x Alarm Signal Output Plug. 1 x Spare Fuse (held near the rear power socket). If the weight of your order exceeds 150 lbs.
Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.Parts must be resaleable and in the original packaging. We cannot take back used products.
We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California.Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together.
We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "orionmotortech" and is located in this country: US. This item can be shipped to United States.(71×50×25 cm)